Share this Job

Date: Dec 25, 2017

Location: Franklin, Wisconsin, US, 53132

Company: Lubrizol Corporation

POSITION SUMMARY:

The Commercial Machine Process Technician is primarily responsible to set-up, troubleshoot and maintain commercial equipment to meet or exceed manufacturing expectations and requirements.

 

DESCRIPTION OF ESSENTIAL DUTIES:

  • Perform commercial molding machine set-ups from mold installation thru producing an acceptable product
  • Primary contact for troubleshooting of commercial molding process/equipment problems, analyze problems / solutions
  • Support the manufacturing of molding jobs thru material changes and equipment maintenance, ie; filters, mixers, etc.
  • Perform daily production and routine maintenance of mold cleanings, plastic media blast and/or solvent cleaning verify mold condition when job is complete
  • Verify Line Clearance
  • Convey unused tooling to the proper storage locations and condition / repair or replace if needed.
  • Run acceptable first shots
  • Mold Test slabs and pucks
  • Signoffs on Routers and Post Cure Verifications
  • Maintain Safety, Quality, Productivity, scrap, rework, utilization, and efficiency
  • Other duties as assigned.
  • 6 axis robot programming a plus

 

DESCRIPTION OF General Duties:

  • Observe and promote Company standards and policies on safety, quality and productivity.
  • Understand Good Manufacturing Practices (GMP) in medical device and clean room environment
  • Support and observe 5S and other lean manufacturing methodologies.

 

DIRECT REPORTS 

  • None

 

HIRING GUIDELINES: (To perform job successfully, and individual must be able to perform each essential duty satisfactorily.  The requirements listed below are representative of the knowledge, skills, and/or ability required/preferred).

  • Successful completion of four-years of high school, or equivalent is required.
  • Completion of two years of college or graduation from a two-year technical college with an associate’s degree in Mechanical, Electrical or Pneumatics Technology , is a plus
  • Experience performing mechanical, electrical, electronics, hydraulics or pneumatic systems repair is a requirement
  • Five or more years of experience, or any combination of education and experience that provides equivalent knowledge, skills and abilities.
  • Clear understanding of Preventative Maintenance Programs and 5S principles
  • Medical Device manufacturing and clean room environment experience is desired

 

 

OTHER GUIDELINES:

  • Excellent (written and verbal) communication and effective human interaction skills.
  • Flexible to change, and possess a high degree level of integrity and “can do attitude”.
  • Willing to work in a team environment and contribute to group goals
  • Able to convert units of measurement, add, subtract multiplication and division.
  • Ability to receive and provide instructions in a positive manner.

 

PHYSICAL DEMANDS: (The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of the job.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential function.  The phrases “occasionally”, “frequently” and “constantly” correspond to the following definitions: “occasionally” means up to 33% of working time, “frequently” means between 34%-66% of working time, and “constantly” means 67% and more of working time.  Additionally vision requirement definitions are as follows: close vision-clear vision at 20 inches or less, distance vision—clear vision at 20 feet or more, color vision-ability to identify and distinguish colors, peripheral vision-ability to observe an area that can be seen up and down or to the left and right while eyes are fixed on a given point, depth perception-three-dimensional vision-ability to judge distances and spatial  relationships and ability to focus—ability to adjust the eye to bring an object into sharp focus ).

 

This physical demand level for this job is considered medium with frequently lifting 10-25 pounds. Exposure to lifting more than 50 pounds is rare (if ever).

 

During maintenance work, employee will frequently be exposed to sustained bending, stoop, kneel, crouch/crawl, reach above shoulders and repetitive bending or squatting with constant exposure to dynamic standing/walking and using hands to finer/handle or touch.  The employee will occasionally be exposed to static standing/walking, pushing/pulling (15lbs), floor to knuckle lift/lower (15lbs), knuckle to shoulder lift/lower (15lbs), shoulder to overhead lift/lower (15lbs) or climb/balance (on ladder).  The employee will rarely (if ever) be exposed to using foot/feet to operate machine.

 

The following vision requirements apply: close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

 

WORK ENVIRONMENT: (The work environment characteristics described here are representative of those an employee may encounter while performing the essential functions of this job.  Reasonable accommodations may be made to enable individuals with disabilities).

The employee will constantly be exposed to working near moving mechanical parts with frequent risk of electrical shock.  The employee will occasionally be subject to, working in high precarious places, fumes or airborne particles, and outdoor weather conditions, but rarely (if ever) be exposed to extreme cold or heat (non-weather) or wet/humid non weather conditions, travel on company business.  The noise level is consideredmoderate (normal shop conditions).

 

The employee will be required to wear appropriate Personal Protective Equipment such as: safety glasses in the designated areas, hairnet/beardcover and jumpsuit when on the production floor, gloves when handling hot objects or solvents, earplugs when required and steel toed shoes (preferred).

 

TOOLS/EQUIPMENT/COMPUTER SOFTWARE:

The employee will constantly use hand and power tools as well as other maintenance equipment with frequent use of shop tools, electrical test meters and PC with Microsoft Office Products.


 

.

 

 

 


Nearest Major Market: Milwaukee

Job Segment: Hydraulics, Technician, Maintenance, Electrical, Testing, Engineering, Technology, Manufacturing